System settings

You are here:
Estimated reading time: 2 minute
At this stage, you need to make a number of important platform settings for the full operation of the system.

Branding

So the brand settings include several tabs: Image on spinner | Image in menu | Background image on auth page | Logo image on auth page | Load favicon.ico

First Step – “Image on spinner”.

To set a custom image to be displayed on the loading screen above the spinner, you need to:
  • 1. In the main menu on the left, select the drop-down section “System Settings”. Next, select “Branding”.
  • 2. Select the “Image on spinner” tab.
  • 3. Click on the “pencil” icon (see screenshot).

  • 4. Next, you need to select the image you need from the disk of your device.
  • 5. If necessary, cut it to the desired proportions and using the image editor built into the platform, then click “OK”

6. To complete the installation of the image, be sure to click “Save Changes”

NOTE! Required image format and resolution: 150x80px, PNG with alpha channel

Second step “Image in menu”.


To set the image that is displayed in the main menu from above, you must:

  • 1. Located in the “System Settings” section on the “Branding” page – Select the “Image in menu” tab.
  • 2. Next, you need to repeat steps 3 to 5 from the previous step (image on spinner).
  • 3. To complete the installation of the image, be sure to click “Save Changes”.

This stage is also completed, you can proceed to the next.


Third step – Background image on auth page

And so for setting the background image, as well as the welcome message on the authorization page:

  • 1. Located in the “System Settings” section on the “Branding” page – Select the “Background image on auth page” tab.
  • 2. Click on the “pencil” icon (see screenshot) and then you need to select the image you need from the disk of your device and then, if necessary, crop it to the desired proportions using the image editor built into the platform (as in steps 3 to 5 of the first step)
  • 3. Specify the Background color fill that will fill the space behind the set early image.
  • 4. Specify Foreground color (greeting text color)






5. Enter your welcome text. To do this, go to the main menu item @“Translations”, and follow the instructions on the screenshot


.
Note! To quickly find the desired phrase, use the search bar and enter part of the desired phrase into it. The filtering of the result occurs immediately

  1. 6. To complete the installation of the image, be sure to click “Save Changes”.


This stage is also completed, you can proceed to the next.

Fourth step – Logo image on auth page

The next step is to set up the logo image on the login page.

Fifth step – Loading favicon.ico

And the icon to display in the browser.

To install these images, you need to go to the appropriate tabs and do the same operations as in the First step (spinner image).
>.
Since the process is absolutely comparable, it makes no sense to describe it completely. If you have a problem, please contact us on the Forum

Domain settings

And so, to configure the parameters of the domain and administrator’s e-mail, as well as the system user name, you need:

  • 1. From the “System Settings” drop-down menu, select “Domain Settings”.
  • 2. In field 1, specify the main Domain where your platform is located.
  • 3. In field 2, the system Email from which notifications will be sent to your clients and users.
  • 4. In field 2 specify a system username that will also be seen by your clients and users.
  • 5. After filling in the fields, be sure to click “Save Changes”.

Was this Article helpful?
Dislike 0
Number of views: 33

Continue reading

Previous page: Administrator settings
Any questions? Look in our Knowledge Base.